Tools you will need
This list will show the minimum tool selection I believe is necessary to properly complete an AK series rifle build. You may already have some of these tools and I will show you how to make some that are specific to the AK rifle build.
Hand tools
Minimum 5" bench vise
2lb sledge hammer
Set of screw drivers
Set of punches
Several 3" to 5" "C" clamps
8" vise grip pliers
Round, flat and square files
Power tools
Drill press with vise
Dremel tool
Angle grinder
Jig saw with metal blades
110 volt spot welder or MIG/TIG welder (Optional)
The listed tools are used for all types of builds. There are some additional tools that are specific to rivet and screw builds.
CYA message: This web page is posted for informational and educational use only. Any other use of the information on this website is solely at the user's risk.